Our Panic Bar Installation In Houston Service

Scorpion Locksmith provides full Panic Bar Installation In Houston for new doors and existing openings. We stock high quality exit devices and the parts that go with them, then cut and fit everything on site. You get a clean finish that looks good and works smoothly.

Here is what you can expect from our team

• Same day or next day scheduling in most cases
• Clear options that match your door type and code needs
• Careful measurement and clean drilling
• Proper strikes, fasteners, and through bolts for lasting strength
• Adjustment and testing before we leave
• Cleanup so your entry stays tidy and ready for use

Have a deadline because of a fire inspection or a grand opening? Ask us about rush service. We handle new installs, replacements, and upgrades to existing bars.

How Panic Bars Help During Real Houston Moments

• Summer storms caused a brief outage and your store filled with smoke from a back room motor. A working panic bar clears the space in seconds.
• Astros game nights draw crowds to your sports bar in EaDo. A panic bar avoids a bottleneck at closing time and during drills.
• Church service runs long in Alief and kids rush the hallways. A bar with smooth action and the right closer keeps traffic steady and safe.
• A warehouse near Port Houston gets a surprise inspection. Your panic hardware opens easily, the door self-latches, and you pass with less stress.

Types of Panic Bars We Install

Every door and building is a little different. We install a wide range of devices to fit your opening, occupancy, and budget.

• Rim exit devices
  • The most common style for single doors or pairs with a mullion
  • Latch on the edge of the door, strong and simple
• Mortise exit devices
  • Latch case is inside the door
  • Clean look with solid performance
• Surface vertical rod devices
  • Top and bottom latches surface mounted
  • Good for pairs of doors without a center mullion
• Concealed vertical rod devices
  • Latches run inside the door
  • Sleek appearance for glass or narrow stile aluminum doors
• Fire rated exit devices
  • Works with labeled fire doors so they self-latch and stay shut during a fire
• Alarmed exit devices
  • Local alarm sounds if the door opens, great for retail back doors
• Electrified exit devices
  • Electric latch retraction or request to exit for access control
  • Works with card readers, keypads, or intercom systems
• Quiet or low sound latch options
  • Smoother latching for schools, clinics, and offices
• Dogging options
  • Hex key or cylinder dogging to hold the latch retracted during business hours where allowed

Not sure which one fits your door? A quick site visit clears it up. We measure, check your frame and stile, and match hardware that fits your doorway and use case.

ADA, Safety, and Code Compliance in Houston

Panic bars often relate to ADA guidelines and building and fire codes used across Houston and Harris County. Here are common points we help you address

• One motion to exit with no key, card, or tight grasping
• Bar height mounted within the required range
• Unobstructed clear width through the door
• Self latching on labeled fire doors
• Proper signage and an inside lock function that allows free exit
• No double cylinder deadbolts on egress doors
• Correct closer speed and latch speed so the door shuts and latches on its own

City and county officials use standards from the International Building Code and NFPA Life Safety Code with local amendments. Final decisions always sit with your local authority having jurisdiction. We install to widely accepted standards and coordinate with you, your contractor, and your inspector so you have what you need. Learn more about federal accessibility on the ADA Standards for Accessible Design.

Need Panic Bar Installation In Houston that meets ADA guidelines and local fire code? Call (281) 623-1517.

Door Types We Work On Across Houston

• Hollow metal and steel doors in warehouses and back exits
• Solid wood and commercial wood doors in offices and clinics
• Aluminum storefront doors, including narrow stile doors in retail centers
• Glass doors with rails that accept exit devices
• Double doors with or without a removable center mullion
• Fire rated doors on corridors and stairwells

We check for labels on fire doors, measure stile width on aluminum doors, and confirm frame type so you get the right device and strike. Many storefront doors need special hardware like Adams Rite type latches or narrow stile bars. We carry those options.

Common Problems We Fix

Does your current bar feel sticky or loose? These issues are common, and we can sort them out during a replacement or repair

• Bar is hard to push, then pops open suddenly
• Door does not latch, so it drifts open
• Panic bar hits the frame or the strike is misaligned
• Vertical rods go out of sync, so the top or bottom latch drags
• Fire door closer slams or will not shut fully
• People wedge the door open because the bar is too stiff
• Missing dogging key, broken spring, or worn end caps
• Corrosion from Houston humidity causing sluggish action
• Alarmed bars that chirp or false alarm because of a misaligned switch
• Code issues like a keyed lock on the inside, which is not allowed on egress doors

Why fight a door that slows your staff and annoys customers? A new, smooth exit device saves time every day and works right during emergencies.

Our Installation Process

1. Site visit and measurement

• We confirm door width, height, thickness, and material
• We check handing and swing direction
• We look for fire labels and existing holes
• We assess security needs and code triggers based on use

2. Hardware selection

• We match the correct device type and trim
• We choose the right strike for your frame or mullion
• We confirm finish and style for your space

3. Prep and drill

• We mark all points, use proper templates, and drill clean holes
• We add through bolts and reinforcement where needed
• We keep surfaces protected and vacuum as we go

4. Mount device and trim

• We install the bar, latch, and outside trim
• We fit strikes, top and bottom latches if present, and adjust for smooth action

5. Test and adjust

• We test with the closer and latch speed set correctly
• We check free egress, re latching, and any alarm or electric functions
• We guide you on daily use and upkeep

6. Clean up and sign off

• We wipe down the door and frame
• We label dogging keys or leave instructions with your manager

You get a clean look, a door that closes and latches on its own, and a push bar that just works.