License Number: B09416401
License Number: B09416401
Strong locks keep your business open, safe, and on schedule. If a door is hard to lock, if keys keep walking off, or if your storefront hardware has seen better days, Scorpion Locksmith is ready to help. We specialize in Commercial Lock installation in Houston with same day and 24/7 service for offices, retail shops, restaurants, clinics, warehouses, and more.
We are local, licensed, and insured. Our team installs Grade 1 and Grade 2 commercial hardware, high security cylinders, panic bars, storefront locks, and ADA compliant lever sets across the Greater Houston area. Want pricing clarity and a clean job that works the first time. Call us at (281) 623-1517 or visit https://scorpionlocksmithhouston.com. You can also contact us online to request a quote.
Your doors are used hundreds or even thousands of times a week. Houston humidity, heavy traffic, and employee turnover are tough on hardware. Do any of these sound familiar.
If so, a proper Commercial Lock installation can save time, reduce risk, and make daily life easier. Our techs diagnose the issue, explain options, and install the right hardware for your door and your code requirements.
Every business is different, and so is every door. We stock and source hardware that stands up to Houston heat and heavy use.
Most commercial interior and exterior doors use lever handles. We install
If your building still has knobs that hurt to turn, a conversion to lever handles gets you closer to ADA and makes daily access easier for everyone.
We add security where you need it, without making the door a headache to operate.
We install deadbolts on non egress doors that allow it and will advise on code safe choices for exit paths.
Houston has a lot of aluminum storefront doors, and they need special hardware.
If your glass door does not latch unless you pull it, the lock is only part of the story. We also adjust strikes and door closers so the door closes and latches as it should.
Certain occupancies and occupant loads require panic hardware. We install
We make sure the door swings and latches correctly, the bar operates smoothly, and the egress path is not blocked. Learn more about our panic bar installation and exit device work.
Worried about keys being copied without your say so. We set up
With key control, you decide who gets a copy. We can also set up a process for issuing, tracking, and recovering keys.
Need the manager to open every door and staff to open only theirs. A master key system keeps things simple without a giant key ring.
We document your system and provide an easy chart so replacements and changes stay organized.
Want coded entry without handing out keys. We install
We can install the lock hardware now and plan for future readers and keyless entry systems so you avoid re drilling later.
A lock only works if the door closes and aligns.
If your door rubs from humidity or a shifting frame, we address that so your new lock performs day after day.
Houston businesses follow national standards and local enforcement. We help you meet ADA and fire code without guesswork.
We install lever sets, paddles, and exit devices that meet these rules. Need us to adjust closer force or latch alignment so doors open smoothly. We handle that too. See the 2010 ADA Standards for Accessible Design for reference.
We match the hardware to door labels and keep egress simple. You should be able to exit with one motion.
We work with your property manager, GC, or inspector notes and keep your project moving.
You should know who is coming, what we are installing, and what it will cost. Here is how we work.
We start with a call or site visit. We ask a few questions.
Photos help. If you text or email pictures of the edge of the door, the strike, and the current hardware, we can quote faster.
We give you a few choices that fit your needs and budget. We explain the differences between Grade 1 and Grade 2, high security cylinders, and functions like entry vs storeroom. You pick the option that makes sense.
We offer same day service across most of Houston and can schedule off hours or weekends so you avoid downtime. Early morning in the Energy Corridor, late night in Midtown, or a Sunday in the Galleria, we have you covered.
We arrive on time with the right hardware. We
Your door should close, latch, and lock smoothly. If it does not, we keep adjusting until it does.
We walk you through operation, show you key control steps, and provide any codes for electronic locks. If we set up a master key system, we give you a simple chart that explains which keys open which doors.
Break in at your shop on Westheimer. Back door failure at a warehouse near the Ship Channel. Clinic entry lock jammed before opening in Bellaire. We offer 24/7 emergency service across Houston.
Common emergency calls
We can secure the opening, install new hardware, and get you back to business. Call (281) 623-1517 any time.
Different sites need different solutions. We install hardware that matches real use.
Ask about panic bar installation and push bar options for busy exits.
Not sure if you need a brand new lock or just a rekey.
We often do a mix. Replace the front lock with a high security cylinder and rekey interior doors to a new key set. We will lay out a simple plan and let you decide.
A stronger lock is only part of the story. We build a simple security stack.
Our weather swings fast. Heat, humidity, and storms push doors out of alignment. Here is how we handle it.
From Katy to Kingwood and from Heights to Pearland, we have seen every door mood Houston can throw at us.
Most single lock installs take 45 to 90 minutes. Storefront conversions or mortise swaps can take longer. Exit device installs can run 90 minutes to a few hours, based on door condition. A small office with 6 to 10 doors can often be completed in one day, including setup of a basic master key system.
Have a larger project in Downtown or Greenway Plaza and need nights or weekends to avoid disrupting tenants. We schedule crews to match your timeline.
Key control matters. We help you set a simple policy.
We can provide restricted keys so copies are only made with your written approval.
Every door and project is a little different, but here are common ranges for planning. Hardware brand and grade affect the total.
We will give you a written quote before work starts so there are no surprises. You can also contact us for a detailed estimate.
Still deciding. If you see any of this, it is time.
Call us for a quick inspection. We will show you what is wrong and how to fix it.
You want your entrance to look sharp and your tenants to feel confident. Our team
You get a result that works and looks like it belongs.
Working with a GC on a new suite in the Galleria area or a remodel in Montrose. Bring us in early so hardware and door prep match.
This keeps you from re drilling doors or waiting on the right trim at the last minute.
Beyond installing the lock, we make sure the door is safe and smooth.
You get a door that opens when it should and locks when it should.
You have choices in Houston. Here is why businesses keep us on speed dial.
Need proof. Call us for a one door job. We will earn the rest.
We provide Commercial Lock installation across
Houston, Downtown, Midtown, Uptown, Galleria, Greenway Plaza. The Heights, Montrose, EaDo, Rice Village, Bellaire. Energy Corridor, Westchase, Memorial, Spring Branch. Katy, Cypress, Sugar Land, Missouri City, Pearland. Pasadena, Baytown, Deer Park, La Porte, Humble, Kingwood, The Woodlands.
Not on the list. Call us and we will see how we can help.
If you need dependable Commercial Lock installation, upgrades to high security, or ADA compliant hardware, Scorpion Locksmith is ready to roll. We make doors safe, code compliant, and easy to use, even in Houston’s heat and humidity. Let’s get your entry, exits, and interiors working the way they should.
Call now at (281) 623-1517 or visit https://scorpionlocksmithhouston.com to schedule your install or contact us for a quote.
Old keys are out there and you have new hires coming. We rekey 12 cylinders to a new master system, set manager keys, and staff keys. You get a fresh start by lunchtime. Ask about commercial rekeying for smooth transitions.
The deadlatch is not hitting the strike because the door sags. We adjust the hinges, set the closer, install a new deadlatch, and add a latch guard. Staff can lock up without wrestling the door. We also install panic bars for compliant exits.
Too many copies floating around. We install restricted key cylinders, issue tracked keys, and set the front and office on one key plan. No more mystery duplicates.
Fire inspector wants panic bars and free egress. We install rim exit devices with exterior lever trim, add signage, and test operation. Pass your reinspection with confidence. Explore our exit device installation options.
Old knobs fail ADA. We install lever sets across 8 doors and adjust closers so doors open with low force. Patients and staff notice the difference right away.
Good hardware should fade into the background. Doors should open smoothly for the right people and stop the wrong ones, all day, every day. If your doors are not doing that, it is time to fix them.
Scorpion Locksmith handles Commercial Lock installation across Houston with practical solutions, fast service, and friendly techs who take pride in clean work. Need a quote today. Call (281) 623-1517 or visit https://scorpionlocksmithhouston.com, or contact us online.
Once your locks are in, a little care goes a long way.
We can set up a simple visit schedule for larger sites to keep everything working.
Have a door that needs a new lock today. Want to plan a full hardware upgrade for a multi tenant space. We make it easy. Reach Scorpion Locksmith at (281) 623-1517 or online at https://scorpionlocksmithhouston.com. We are here 24/7 and ready to help with your Commercial Lock installation in Houston.
